Motorcycle Preparation
Get your motorcycle serviced well in advance and do not wait for the last minute. At ground level the most important thing are the tyres. Ensure that you have adequate tread on them. We recommend you start the ride with a brand new set of tubes; you are less likely to encounter punctures.
Inspect and make sure that your motorcycle has genuine OE parts, especially hubs, spokes, rims and other engine components. Check the condition of the front fork oil seals and replace if needed. Check the rear swing-arm bush for play and replace if needed.
Check your chain and rear sprocket for wear and tear. If you find that there are less than four notch adjustments or broken teeth, replace your chain and both your sprockets.
Your motorcycle’s clutch is really crucial for any trip, so make sure that your clutch is in good order and adjusted properly .
Check the battery and the earthing connections. If you have any history of electrical trouble, be sure that the problem is completely solved.
Check all the rubber components like carburettor manifold, fuel lines, air filter manifold etc. for wear and tear and replace if in doubt.
Check all cables and if found to be frayed/damaged, replace immediately.
Finally tighten all the nuts and bolts and if it is found to slip or the threads are damaged replace the relevant parts.